SDSHobby
RC QUADCOPTER X4 FLYER WHOLE SET INCLUDE 4 HOOP PROTECTION FUSELAGE
| Product Size | 80x80x20cm |
| Shaft distance | 510mm |
| Whole weight | 1200g(include 4 Hoop Protection Fuselage) |
| Max Flying weight | 2000g |
| Motor | 2815 Brushless Motor 750KV |
| Propeller | 1245 clockwise&conterclockwise propeller |
| Max Current of ESC | 10A |
| Landing Gear | Aluminium alloy landing gear |
| Flying Time | 12 Minutes |
| PayLoad | 500g |
| Battery | 3S 1800mah-4500mah 20C Lipo battery. we suggest 3S 2200mah 20C . |
| Radio | 4CH or above . |
SDSHobby
SKYRC PROFESSIONAL MULTI FUNCTION BLADE BALANCE
Features:, SkyRC Professional Multi Function Blade Balancer, Product Details:, Item Packing:,
A professional blade balancer perfect for making sure your blades ...SDSHobby
SMOKLING IGNITION FOR RC HOBBY
Product detail:, 1., foundation of the old ignition, it has these two the function : it can be ignited for the second circulation and can be cut power source automatically after 2 sec ignition,
It can be used for wireless spark for the fireworks ...SDSHobby
SMALL RUBBER RING FOR BY8400-H 80CC STARTER(HELICOPTER)
| outer diameter | 36mm |
| inside diameter | 24mm |
| Height | 30mm |
Description:, The material of this product is Polyurethane, very good abrasion resistance function. The interior of the ring is designed according to the curve of the propeller. Big interface, big friction. So it will not damage the propeller and spinner., Specifications:, Size:,
SDSHobby
USB SIMULATOR CABLE
| Product Name | USB Simulator Cable |
| Pleaser note | On a system with only minimum system requirements,the |
Minimum system requirements:, -100% Pentium III or AMD Athlon/64 compatible processor with at least 800Mhz, Recommended system requirements:, -100% Pentium IV or AMD 64 compatible processor with at least 1600Mhz,
-128MB RAM -1GB free hard disc memory -CD-ROM drive -Open ...SDSHobby
WM MX2 HEPP RC MODEL AEROBATICS ELECTRIC AIRPLANE ARF TYPE B
| Wingspan | 955mm |
| Length | 945mm |
| Wing Area | 15.2dm |
| Weight | 550g (without battery) |
| Motor | 2834;2215; 2217;950-1100KV Brushless outrunner |
| ESC | 25-30A |
| Battery | 3S 11.1V 1100-1300MAH Li-Po |
| Prop | 10*4.7/11*4.7 |
| Servo | 1.5-2kg/cm, 0.1-0.18sec, 9-12g(4pcs) |
Specifications:, Requirements for Ready to Fly Set (need to buy separately):, Features:, The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious damage would not be caused by slight faulty operation.,
The revolutionary design adds to the structural intensity and the ...SDSHobby
C2822 SERIES MOTOR SHAFT D3MM WITH CIRCLIP
| L2 (Overall Length) | 36mm |
| L1 (Short End) | 12.5mm |
| D(Shaft Diameter) | 3mm |
| L3 x L4 (Groove) | 4.5 x 2.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C2826 SERIES MOTOR SHAFT D3MM WITH CIRCLIP
| L2 (Overall Length) | 40mm |
| L1 (Short End) | 12.5mm |
| D(Shaft Diameter) | 3mm |
| L3 x L4 (Groove) | 4.5 x 2.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C2830 SERIES MOTOR SHAFT D3MM WITH CIRCLIP
| L2 (Overall Length) | 44mm |
| L1 (Short End) | 12.5mm |
| D(Shaft Diameter) | 3mm |
| L3 x L4 (Groove) | 4.5 x 2mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C2836 SERIES MOTOR SHAFT D3.8MM WITH CIRCLIP
| L2 (Overall Length) | 50mm |
| L1 (Short End) | 12mm |
| D(Shaft Diameter) | 3.8mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C3530 SERIES MOTOR SHAFT D4MM WITH CIRCLIP
| L2 (Overall Length) | 48.8mm |
| L1 (Short End) | 18.5mm |
| D(Shaft Diameter) | 4mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C3536 SERIES MOTOR SHAFT D4MM WITH CIRCLIP
| L2 (Overall Length) | 55mm |
| L1 (Short End) | 18.5mm |
| D(Shaft Diameter) | 4mm |
| L3 x L4 (Groove) | 4.5 x 2.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C3542 SERIES MOTOR SHAFT D3.86MM WITH CIRCLIP
| L2 (Overall Length) | 61mm |
| L1 (Short End) | 18.5mm |
| D(Shaft Diameter) | 3.86mm |
| L3 x L4 (Groove) | 6 x 3.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C3548 SERIES MOTOR SHAFT D3.86MM WITH CIRCLIP
| L2 (Overall Length) | 67mm |
| L1 (Short End) | 18mm |
| D(Shaft Diameter) | 3.86mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C4240 SERIES MOTOR SHAFT D5MM WITH CIRCLIP
| L2 (Overall Length) | 60mm |
| L1 (Short End) | 20.5mm |
| D(Shaft Diameter) | 5mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,